Toilet Repair Near Me Brookhaven | Running Toilet Leak Repair
The Brookhaven plumbers at Morningside Plumbing offer toilet repair, toilet replacement, toilet installation, and other toilet solutions. When toilet repair services are not the home plumbing services you need, they also provide leak detection, pipe repair, maintenance, drain cleaning services, and bathroom plumbing services. Brookhaven bathroom plumbing services include faucet, shower, sink, tub, and fixture repair, replacement, and installation.
Brookhaven Plumbers Provide Plumbing Repair Service
We are a full-service local plumbing company in Midtown-Atlanta, GA. As a trusted neighborhood plumber for over fifty years, we supply home and commercial plumbing services to Brookhaven, GA, and areas nearby. From Ansley Park to Avondale Estates to Emory Village to Dunwoody, our water heater repair, tankless water heater installation, and emergency water heater replacement service are top-rated. Take a look at our superb reviews, which consistently mention an appreciation for our speedy service and high-quality work. Compliments like that do not come out of thin air; our focus is on Brookhaven customer satisfaction, which has been going on since day one.
Is Your Toilet Running?
Getting to the bottom of a leaky toilet can be perplexing. To find out where the leak is coming from takes a little work. To find out if a leaky toilet has a bad flapper, put food coloring or a dye tablet into the tank and wait about 20 minutes. Color in the bowl; you probably have a leaky flapper. If so, then repairs are in order. Only when the flapper is replaced will the toilet leak be repaired.
How Much Water Does a Running Toilet in GA Waste?
A running toilet is a leaky toilet. With a staggering 200 gallons per day, 6,000 gallons a month, you could add hundreds of dollars to your water bill. Over a year, this could mean tens of thousands of gallons down the drain, a significant expense for homeowners, and a strain on community water resources. However, addressing this issue promptly can save you money. Fixing a running toilet could save hundreds on your water bill, making it a cost-effective and environmentally friendly repair. Understanding the environmental impact of this waste can motivate us to take action and make a difference, making us feel responsible and motivated to conserve water.
What Causes a Brookhaven Toilet to Run Intermittently?
A variety of issues can cause an intermittently running toilet and is a frustrating mystery for most homeowners. And for some home plumbers, for that matter. Whether you have trouble with a residential or commercial Brookhaven commode, when it continues to run, there are a few common culprits.
Defective Flapper: The flapper may seal after one flush but not the next or intermittently without reason. This allows water to trickle into the bowl sometimes.
Faulty Fill Valve: A fill valve that doesn’t shut off completely may cause water to overflow into the toilet bowl.
Loose Chain: The chain attached to the flapper may be too short or tangled, preventing the flapper from closing properly.
Float Issues: An improperly adjusted float may cause water to keep running.
These issues are typically easy for a professional plumber to identify and fix. What can you do? Caring for your toilet is about knowing what to and not to flush and when to call a plumber for help.
What is a toilet flapper?
A toilet flapper is a rubber stopper inside the toilet tank. The moving part of the flush valve holds water in and lets water out of the tank when flushed.
Why check your flapper?
Flappers are rubber, and all of them will deteriorate over time. It is a good idea to do a flapper check annually. As part of an ideal toilet maintenance practice every year, make sure your flappers still fit tightly over the flush tube. Replace worn-out, warped, and ill-fitting flappers, or contact us to avoid having a running toilet that wastes a lot of water and funds.
How to Fix a Running Toilet Flapper
Here’s a step-by-step guide to fix a running toilet flapper:
Turn off the Water Supply
Locate the valve on the wall behind the bowl and below the toilet tank and turn it off. You can turn off the water at the main cut-off valve if you cannot find the toilet’s valve or if it is stuck.
Remove the Toilet Tank Lid
These lids are heavy and breakable, and it can be impossible to find a replacement. So, handle it with care.
Flush the Toilet
Note the chain length from the flush handle to the flapper for later.
Check the Flapper
If the flapper has a ring around the tube, remove the refill tube from the overflow tube. Otherwise, go to step 5.
Remove the Flapper
Disconnect the chain from the flush lever. Slide the old flapper up and off the overflow tube. You might need to unhook the flapper ears from the overflow tube first. For those with newer plastic flush valves, bend the flapper ears out from the pins.
Inspect the Flapper
Check for damage, including cracks and warping. If the flapper looks good to you, adjust the chain to ensure it is an optimal length. Not too tight or too loose. It needs to be just right. Turn on the water supply, let the tank fill, and flush. Does the toilet still run? If not, you are done. However, if the flapper is damaged, you must replace it and go to step 7.
Find Toilet Info
You need the manufacturer and model number for the toilet. The manufacturer is typically stamped on the outside of the bowl near the seat hinges. Toilet model numbers are usually on the inside back of the tank. Take a photo or write down the info to shop for the right replacement part.
Shop for Replacement
Take the info and the old flapper to a plumbing supply, hardware, or home improvement store with replacement flappers.
Install Flapper
Slide the new flapper over the overflow tube until the ring touches the bottom of the tank, with the flapper bulb centered on the valve opening. For plastic valves, use scissors to cut the ring along market lines off the flapper and slip the flapper ears over the pins on the flush valve. Attach the new beaded metal chain to the flush lever and adjust the length.
Turn the Water Back On
Gradually turn on the water supply at the valve, let the tank fill, and make sure the flapper opens, closes, and seals properly without leaking.
Be prepared to pay $8-$21 for assorted flappers in Brookhaven.
Toilet Installation, Replacement, Leak Detection, and Other Plumbing Repair in Brookhaven
How Much Does It Cost for a Local Plumber to Unclog a Toilet?
The cost for a Brookhaven plumber to repair a clogged toilet varies depending on the severity of the blockage and the plumber’s pricing model. The average cost is about $100 to $200 for a basic clog. However, the cost of the service may increase if the clog is deep within the plumbing system or if there’s a more complex underlying issue. Additionally, emergency services and after-hours calls can increase the rate. To save on costs, some homeowners try DIY unclogging methods first. When DIY attempts in Brookhaven are unsuccessful, it’s time to call in a professional.
How Much Does It Cost to Fix a Running Toilet?
The cost of fixing a running toilet in Brookhaven varies depending on the root of the problem. Simple fixes, such as adjusting the chain or float, can often be done at home at no additional cost. Even if the flapper or fill valve needs to be replaced, you can expect to spend around $15–$25 for parts if you DIY. For professional repairs, costs range from $75 to $150. If there are additional complications, such as plumbing issues deeper within the system, the repair cost may be higher.
How Many Gallons Does a Running Toilet in Brookhaven Leak Per Day? Per Month? Per Year?
A running toilet can use up to 200 gallons of water daily, translating to 6,000 gallons monthly and 72,000 gallons yearly. That is enough water to fill a larger-than-average swimming pool three times! This wasted water impacts your utility bills and has environmental consequences. The excess usage can pressure municipal water supplies, particularly in areas prone to drought. However, quickly addressing the problem in Brookhaven can prevent further waste and reduce costs. Remember, timely repairs can make a significant difference in conserving water, saving money, and avoiding potential repair issues down the line.
How Many Gallons in a Toilet Tank?
The typical toilet tank holds between 1.6 and 3.5 gallons of water, depending on its design. Newer, water-efficient models often have tanks with around 1.6 gallons, while older toilets may hold closer to 3.5 gallons. Low-flow toilets are a great option to reduce water usage in homes, as they use significantly less water per flush.
Conserving Water with Toilet Repair Services in Brookhaven
How is that new ultra-low-flow toilet in Brookhaven, Georgia, working for you? Have your water bills decreased since its installation? When you wonder how much water and money you are saving, the toilet leaks and your savings are gone.
Flushing the toilet uses the most water in most home plumbing systems and commercial ones. So, it pays to be diligent about toilet maintenance, care, and repair. Check the flapper and chain in your toilet and check the handle. If the toilet handle sticks and the water keeps running, fix or replace it immediately. Remember, do not use the toilet as a garbage can. Each flush uses 1.6 to 6 gallons of water depending on your toilet.
Brookhaven prices are upfront at Morningside Plumbing. You get an estimate and quote for the job with us before we start working. If cheap toilet repair near me, Brookhaven is what you are after; we are not the lowest-priced plumbers. However, please get in touch with us when you need the best toilet repair near me Brookhaven, for reasonable rates. Check out our coupons.
Contact Morningside Plumbing for a consultation, and you will experience pro toilet care. Call 404-873-1881 or contact us online. Toilet repair in Brookhaven is only a phone call away.
