Got questions about tankless water heater installation in Atlanta? The entire process can be easier than you realize.
Is tankless water heater installation in Atlanta an extensive, drawn-out process? The short answer is no!
Your water heater gets a lot of use every day. If you have a houseful full of family visiting for the holidays, it might range on overuse. The biggest expense with a water heater, though, comes from the time you are not using it. The tank always holds gallons of water and keeps it hot – more than enough water to fill a tub. Keeping all that water hot and ready for use at a moment’s notice can be expensive. Whether your water heater is gas or electric, the bill adds up fast.
What’s the First Step in Tankless Water Heater Installation?
The first step is determining the system size you need. System size will vary according to water usage and how many fixtures you have in your home. If your usage is small, perhaps just for one or two people, you may be able to use a point-of-use tankless water heater. These systems service a single fixture or two, and you can install them under a sink. If you have a family, you may need a whole house system.
The temperature of your groundwater is also a factor to consider. Atlanta residents have an advantage over those in northern locations: the groundwater is at a higher temperature. Warmer groundwater means your tankless water heater does not have to work as hard as it would up north.
You also need to know what temperature you want your heated water to reach. The difference between the temperature of the groundwater and your shower water is the “temperature rise.” Your tankless system carries a rating for the temperature rise.
For more information on choosing a tankless water heater for your needs, check out this article from Home Repair at About.com. The simple way to choose the best system for your hot water needs is to talk to your plumber and get expert advice.
Does Tankless Water Heater Installation Take Hours?
The answer: it depends on how you look at it. Yes, it does take hours to install a tankless water heater. But no, it doesn’t take all weekend.
The size of the system you need is one of the biggest factors in determining how long it takes to install a tankless water heater. If you use a low volume of hot water and choose an experienced plumber, the job should be complete in two or three hours. When unexpected problems show up, that estimate will change.
If you have a house that uses a large volume of hot water, the time estimate increases. For a family with children, the job can take ten hours or more.
Much of that time involves replacing gas lines and fittings. A tankless water heating system uses a larger gas supply line than many homes have installed. You may need a higher voltage power supply if you are installing an electric unit. You may also need venting for the proper elimination of carbon monoxide fumes as well.
Will Tankless Water Heater Installation Cost More For Atlanta Residents?
Tankless water heaters are not a low-cost item. However, while the cost of the unit and the installation could run higher than that of a standard water heater, you’ll save money over time. The savings comes because you don’t have water standing in a tank, heating up again and again. The water heats up only once, right when you need it.
Tankless water heaters run water over heated coils on demand. There is a slight wait for the heated water, but your savings can add up fast. Energy Star rates many systems for efficiency. Don’t forget that this rating can provide you with a tax credit. When you count the credit against your initial costs, your savings increase.
Morningside Plumbing can answer all your questions about tankless water heater installation in Atlanta. Find out more today about how Atlanta’s own Morningside Plumbing can get you in hot water.